1. Forum
  2. Fidonet
  3. SYNCHRONET

  • Help needed with new install

    From Mark Acierno@1:103/705 to all on Friday, January 02, 2026 20:55:38
    I was hoping that someone here would be able to help me out. I am trying other install Synchronet on a Pi 5 with a M.2 HAT+. running the latest Pi OS (64-bit). I am using the directions found here: [https://wiki.synchro.net/howto :raspbian_install](https://wiki.synchro.net/howto:raspbian_install)

    everything seems to be running well until I issue "make -f install-sbbs.mk SYMLINK=1" which runs for quite some time and then produces the following error:
    filedat.c:36:10: fatal error: archive.h: No such file or directory
    36 | #include <archive.h>
    | ^~~~~~~~~~~
    Any thoughts? Are there a different set of install instructions I should be following - or is there an easy fix for this error.
    Thanks in advance!
    --- SBBSecho 3.34-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Mark Acierno@1:103/705 to Digital Man on Saturday, January 03, 2026 08:30:12
    Thank you for your assistance - and apologies for initially posting in the wrong place. I tired the command which i think is appropriate to install the prerequisites for the Pi:

    sudo apt install build-essential perl zip git gdb libarchive-dev libncursesw5-dev libnspr4-dev libmosquitto-dev libsystemd-dev libcap-dev xorg-dev libsdl2-dev libgtk-3-dev libglade2-dev python3 python-is-python3 lrzsz gkermit


    and received the following error:
    Note, selecting 'libncurses-dev' instead of 'libncursesw5-dev'
    Error: Unable to locate package libglade2-dev

    Should I down load each package individually?

    Thanks again

    -Mark
    --- SBBSecho 3.34-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Digital Man@1:103/705 to Mark Acierno on Saturday, January 03, 2026 14:31:42
    Re: Help needed with new install
    By: Mark Acierno to Digital Man on Sat Jan 03 2026 08:30 am

    Thank you for your assistance - and apologies for initially posting in the wrong place. I tired the command which i think is appropriate to install the prerequisites for the Pi:

    sudo apt install build-essential perl zip git gdb libarchive-dev libncursesw5-dev libnspr4-dev libmosquitto-dev libsystemd-dev libcap-dev xorg-dev libsdl2-dev libgtk-3-dev libglade2-dev python3 python-is-python3 lrzsz gkermit


    and received the following error:
    Note, selecting 'libncurses-dev' instead of 'libncursesw5-dev'
    Error: Unable to locate package libglade2-dev

    You can likely do fine without libglad2-dev, it's only need for the gtk/GUI utils that most sysops don't ever use.

    Should I down load each package individually?

    Usually not necessary, but if none of the packages install if any one of them can't be installed, then I suppose it's worth a try.
    --
    digital man (rob)

    Synchronet/BBS Terminology Definition #73:
    SIGHUP = Hangup signal sent to a process when its controlling terminal is closed
    Norco, CA WX: 64.4øF, 77.0% humidity, 0 mph SSE wind, 0.05 inches rain/24hrs --- SBBSecho 3.34-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)